Fashion Hack: How To Install Nato Straps On Your Watch?

Introduction

Nato straps are becoming a popular fashion accessory. They are available in various colors, shapes, and sizes and can be used to dress up any watch. 

However, it is not an easy task to install the band if it’s your first time doing something like this. Our blog will look at the detailed steps on how to install Nato straps to help improve the aesthetics of your timepiece.

\

How To Install Nato Straps On Your Watch?

To change a watch band correctly, you will need the help of some of the following tools:

• A new band
• A specialized tool
• A soft cloth

If you don’t have a specialized tool to change the band, you can use a needle, small screwdriver, or sharp knife to remove your old one. However, if you need to do this often, we recommend purchasing a strap-changing kit.

From Leather And Metal To Nato Strap

Remove The Bracelet

First, lay your timepiece on a soft cloth. The next step is to remove the bracelet by taking off its spring bars. You can use something small like a paperclip or a needle if you don’t have a specialized tool.
With the needle, push gently to poke the pin between the wire and lugs of the watch until you feel the spring bars unlock. Do this for the other side too.

Install The Spring Bars Back

Insert one end of the spring bar into the lug hole. Then, use a tool to compress the other end of the spring bar into the second lug hole and make sure it sits all the way in.

Install The New Strap

To install your new band, start by threading one end of the band through the top gap at the “12 o’clock” position. Then thread the other end through the bottom gap. Now you can adjust it to fit and wear!

From Fabric To Nato Strap

Remove The Bracelet

If your watch strap is a fabric type, this is the easiest case to change a watch band. You do not need to remove spring bars, one can simply work on removing the fabric directly off the machine, and it’ll be super easy to do.

Install The New Strap

Insert the new band into the watch with the same procedure as applying for metal and leather bracelets.

When Will You Need To Change The Strap?

Many people don’t pay much attention to the style and quality of their straps, but they instead only pay attention to the faces of their machines. It is a huge mistake as it can cause a significant loss in aesthetic value over time.

There are a few signs that you need to change the band, such as when it is worn due to intensive wear and tear, discoloured and frayed outer parts unable to be cleaned, etc.

It’s necessary to replace these straps with new ones to restore your machine’s function and appearance back to normal again.

How Can You Wear Your Watch Band Longer?

• A good quality strap can be worn for many years if the following instructions are followed:
• Keep it away from continuous heat or cold, like the windowsill or freezer.
• Don’t expose the strap to excess moisture, such as washing your hands with the watch on.
• Avoid contact with sunlight, perfume, hair spray, deodorant, detergent, or bleach products.
• If the strap is in contact with any substance mentioned above, clean it with a soft cloth and water immediately.

Conclusion

We hope you enjoyed our fashion hack on how to install Nato straps to get the look you want on your timepiece. It is a fun way to change your look and add a new dimension to your timepiece.
If you have any problems with the process, don’t hesitate to tell us in the comment section below!